Baseband: MS '1' is up, service is limited

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Baseband: MS '1' is up, service is limited

hungbangchu
Hi all,

I connected, sent and made call successful with osmocombb (with real IMSI and IMEI).

But, now, I get error, always be rejected:


OsmocomBB# show ms
MS '1' is up, service is limited
  IMEI: 357337016773249
     IMEISV: 3573370167732490
     IMEI generation: fixed
  automatic network selection state: A0 null
  cell selection state: PLMN search
  radio ressource layer state: idle
  mobility management layer state: MM idle, PLMN search

OsmocomBB#
% (MS 1)
% Trying to registering with network...


in my config file (/root/.osmocom/bb/mobile.cfg):
!
! OsmocomBB () configuration saved from vty
!!
!
line vty
 no login
!
gps device /dev/ttyACM0
gps baudrate default
no gps enable
!
no hide-default
!
ms 1
 layer2-socket /tmp/osmocom_l2
 sap-socket /tmp/osmocom_sap
 sim reader
 network-selection-mode auto
 imei 357337016773249 0
 imei-fixed
 emergency-imsi 452040399998391
 sms-service-center <a href="tel:%2B84980200030" value="+84980200030" target="_blank">+84980200030
 no call-waiting
 no auto-answer
 no force-rekey
 no clip
 no clir
 tx-power auto
 no simulated-delay
 no stick
 location-updating
 neighbour-measurement
 codec full-speed prefer
 codec half-speed
 no abbrev
 support
  sms
  a5/1
  a5/2
  p-gsm
  e-gsm
  r-gsm
  gsm-850
  dcs
  pcs
  class-900 4
  class-850 4
  class-dcs 1
  class-pcs 1
  channel-capability sdcch+tchf+tchh
  full-speech-v1
  full-speech-v2
  half-speech-v1
  min-rxlev -106
  dsc-max 90
  no skip-max-per-band
 exit
 test-sim
  imsi 001010000000000
  ki xor 00 00 00 00 00 00 00 00 00 00 00 00
  no barred-access
  no rplmn
  hplmn-search foreign-country
 exit
 no shutdown
exit
!



Anyone help me???, thanks a lot!


--
Thanks and Best Regards
--
From: Hoàng Mạnh Hùng
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

hungbangchu
Anyone help me??
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

Bhaskar11
Try either or both of the following:
* set network selection to manual
* set "stick" on

Let us know what works if any!



On Fri, Apr 12, 2013 at 3:58 PM, hungbangchu <[hidden email]> wrote:
Anyone help me??



--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025975.html
Sent from the baseband-devel mailing list archive at Nabble.com.


Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

hungbangchu
Thanks for your support.

* set network selection to manual
* set "stick" on

 --> I set in file mobile.cfg:

*******************************************
!
! OsmocomBB () configuration saved from vty
!!
!
line vty
 no login
!
gps device /dev/ttyACM0
gps baudrate default
no gps enable
!
no hide-default
!
ms 1
 layer2-socket /tmp/osmocom_l2
 sap-socket /tmp/osmocom_sap
 sim reader
 network-selection-mode manual
 imei 356898011087563 0
 imei-fixed
 emergency-imsi 452040399998400
 sms-service-center +84980200030
 no call-waiting
 no auto-answer
 no force-rekey
 no clip
 no clir
 tx-power auto
 no simulated-delay
 stick on
 location-updating
 neighbour-measurement
 codec full-speed prefer
 codec half-speed
 no abbrev
 support
  sms
  a5/1
  a5/2
  p-gsm
  e-gsm
  r-gsm
  gsm-850
  dcs
  pcs
  class-900 4
  class-850 4
  class-dcs 1
  class-pcs 1
  channel-capability sdcch+tchf+tchh
  full-speech-v1
  full-speech-v2
  half-speech-v1
  min-rxlev -106
  dsc-max 90
  no skip-max-per-band
 exit
 test-sim
  imsi 452040399998400
  ki xor 00 00 00 00 00 00 00 00 00 00 00 00
  no barred-access
  no rplmn
  hplmn-search foreign-country
 exit
 no shutdown
exit
!
**************************

I get error:

There is no such command.
Error occurred during reading below line:
 stick on

Failed to parse the config file: '/root/.osmocom/bb/mobile.cfg'


Can you help me?
pab
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

pab
Hi,

There is no such command.
Error occurred during reading below line:
 stick on
'stick' option should be used as 'stick ARFCN'. with this option your MS will be forced to use specific ARFCN. Be sure that this ARFCN is visible by your MS and owned by your SIM's service provider.

Also I think it's difficult for people in this list to help you without logs, at least attached mobile app log could help.

Thanks,
Pavel



On Sat, Apr 13, 2013 at 9:45 AM, hungbangchu <[hidden email]> wrote:
Thanks for your support.

* set network selection to manual
* set "stick" on

 --> I set in file mobile.cfg:

*******************************************
!
! OsmocomBB () configuration saved from vty
!!
!
line vty
 no login
!
gps device /dev/ttyACM0
gps baudrate default
no gps enable
!
no hide-default
!
ms 1
 layer2-socket /tmp/osmocom_l2
 sap-socket /tmp/osmocom_sap
 sim reader
 network-selection-mode manual
 imei 356898011087563 0
 imei-fixed
 emergency-imsi 452040399998400
 sms-service-center +84980200030
 no call-waiting
 no auto-answer
 no force-rekey
 no clip
 no clir
 tx-power auto
 no simulated-delay
 stick on
 location-updating
 neighbour-measurement
 codec full-speed prefer
 codec half-speed
 no abbrev
 support
  sms
  a5/1
  a5/2
  p-gsm
  e-gsm
  r-gsm
  gsm-850
  dcs
  pcs
  class-900 4
  class-850 4
  class-dcs 1
  class-pcs 1
  channel-capability sdcch+tchf+tchh
  full-speech-v1
  full-speech-v2
  half-speech-v1
  min-rxlev -106
  dsc-max 90
  no skip-max-per-band
 exit
 test-sim
  imsi 452040399998400
  ki xor 00 00 00 00 00 00 00 00 00 00 00 00
  no barred-access
  no rplmn
  hplmn-search foreign-country
 exit
 no shutdown
exit
!
**************************

I get error:

There is no such command.
Error occurred during reading below line:
 stick on

Failed to parse the config file: '/root/.osmocom/bb/mobile.cfg'


Can you help me?



--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025978.html
Sent from the baseband-devel mailing list archive at Nabble.com.


Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

Bhaskar11
In reply to this post by hungbangchu
If I remember right to make it ON in the cfg file you simply remove the "no" from "no stick".

It is easier to change it from withing the app in the tty interface. Then save the cfg. This way you do not have to worry about the cfg format.



On Sat, Apr 13, 2013 at 11:15 AM, hungbangchu <[hidden email]> wrote:
Thanks for your support.

* set network selection to manual
* set "stick" on

 --> I set in file mobile.cfg:

*******************************************
!
! OsmocomBB () configuration saved from vty
!!
!
line vty
 no login
!
gps device /dev/ttyACM0
gps baudrate default
no gps enable
!
no hide-default
!
ms 1
 layer2-socket /tmp/osmocom_l2
 sap-socket /tmp/osmocom_sap
 sim reader
 network-selection-mode manual
 imei 356898011087563 0
 imei-fixed
 emergency-imsi 452040399998400
 sms-service-center +84980200030
 no call-waiting
 no auto-answer
 no force-rekey
 no clip
 no clir
 tx-power auto
 no simulated-delay
 stick on
 location-updating
 neighbour-measurement
 codec full-speed prefer
 codec half-speed
 no abbrev
 support
  sms
  a5/1
  a5/2
  p-gsm
  e-gsm
  r-gsm
  gsm-850
  dcs
  pcs
  class-900 4
  class-850 4
  class-dcs 1
  class-pcs 1
  channel-capability sdcch+tchf+tchh
  full-speech-v1
  full-speech-v2
  half-speech-v1
  min-rxlev -106
  dsc-max 90
  no skip-max-per-band
 exit
 test-sim
  imsi 452040399998400
  ki xor 00 00 00 00 00 00 00 00 00 00 00 00
  no barred-access
  no rplmn
  hplmn-search foreign-country
 exit
 no shutdown
exit
!
**************************

I get error:

There is no such command.
Error occurred during reading below line:
 stick on

Failed to parse the config file: '/root/.osmocom/bb/mobile.cfg'


Can you help me?



--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025978.html
Sent from the baseband-devel mailing list archive at Nabble.com.


Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

hungbangchu
This post was updated on .
In reply to this post by pab
Hi,

My attachment are files: mobile.log, layer1.log:
mobile.log
layer1.log

Ìf I removed the "no" from "no stick" --> error:are
There is no such command.
Error occurred during reading below line:
 stick
Failed to parse the config file: '/root/.osmocom/bb/mobile.cfg'

Any one can help me? Thank you.


pab wrote
Hi,

> There is no such command.
> Error occurred during reading below line:
>  stick on
'stick' option should be used as 'stick ARFCN'. with this option your MS
will be forced to use specific ARFCN. Be sure that this ARFCN is visible by
your MS and owned by your SIM's service provider.

Also I think it's difficult for people in this list to help you without
logs, at least attached mobile app log could help.

Thanks,
Pavel
pab
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

pab
Hi,

Could you please provide mobile.log and log from VTY in case of automatic network selection "network-selection-mode auto" ans "no stick" option?

Thanks,
Pavel


On Mon, Apr 15, 2013 at 10:46 AM, hungbangchu <[hidden email]> wrote:
Hi,

My attachment is file mobile.log.

Any one can mobile.log
<http://baseband-devel.722152.n3.nabble.com/file/n4025987/mobile.log>   help
me?



pab wrote
> Hi,
>
>> There is no such command.
>> Error occurred during reading below line:
>>  stick on
> 'stick' option should be used as 'stick ARFCN'. with this option your MS
> will be forced to use specific ARFCN. Be sure that this ARFCN is visible
> by
> your MS and owned by your SIM's service provider.
>
> Also I think it's difficult for people in this list to help you without
> logs, at least attached mobile app log could help.
>
> Thanks,
> Pavel





--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025987.html
Sent from the baseband-devel mailing list archive at Nabble.com.


pab
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

pab
As I see your Channel Requests remain unanswered from the network. Are you sure that you are using firmware compiled with enabled TX (I do not remember if it could be observed from layer1.log)?
If yes, you can try not to use the ARFCN that is selected by MS automatically (in your log - 748DCS) by signal level, but try to stick on another ARFCN: e.g. 746DCS - second candidate by rxlev - or other. for this case use "stick 746" option and check for network's answers (ImmAss or ImmAssReject).
You can also try to use other SIMs.

Thanks,
Pavel


On Mon, Apr 15, 2013 at 1:11 PM, Hoàng Mạnh Hùng <[hidden email]> wrote:
Hi Pavel Baturko,


mobile.cfg, mobile.log, layer1.log and other logs in case of automatic network selection "network-selection-mode auto" ans "no stick" option:

root@UR:/tmp# telnet 127.0.0.1 4247
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Welcome to the OsmocomBB control interface

OsmocomBB> en
OsmocomBB# sho

OsmocomBB# show ms
MS '1' is up, service is limited
  IMEI: 357337016773249
     IMEISV: 3573370167732490
     IMEI generation: fixed
  automatic network selection state: A0 null
  cell selection state: PLMN search
  radio ressource layer state: idle
  mobility management layer state: MM idle, PLMN search

OsmocomBB# show
OsmocomBB# show sub
OsmocomBB# show subscriber
Mobile Subscriber of MS '1':
 IMSI: 452040399998391
 ICCID: 89840403940099983911
 Service Provider Name: VIETTEL
 SMS Service Center Address: <a href="tel:%2B84980200030" value="+84980200030" target="_blank">+84980200030
 Status: U2_NOT_UPDATED  IMSI detached  LAI: invalid
 Key: sequence 1  74 5d 70 bb 32 6a a0 00
 Access barred cells: no
 Access classes: C4
 List of preferred PLMNs:
        MCC    |MNC
        -------+-------
        452    |04        (Vietnam, Viettel Mobile)
        456    |08        (Cambodia, Viettel)
        457    |03        (Laos, Unitel)
        372    |03        (Haiti, 03)

OsmocomBB# show
OsmocomBB# show sup
OsmocomBB# show support
Supported features of MS '1':
 Phase 2 mobile station
 R-GSM        : yes
 E-GSM        : yes
 P-GSM        : yes
 GSM900 Class : 4
 DCS 1800     : yes
 DCS Class    : 1
 GSM 850      : yes
 GSM 850 Class: 4
 PCS 1900     : yes
 PCS Class    : 1
 GSM 480      : no
 GSM 450      : no
 CECS         : no
 VGCS         : no
 VBS          : no
 SMS          : yes
 SS_IND       : yes
 PS_CAP       : no
 CMSP         : no
 SoLSA        : no
 LCSVA        : no
 LOC_SERV     : no
 A5/1         : yes
 A5/2         : yes
 A5/3         : no
 A5/4         : no
 A5/5         : no
 A5/6         : no
 A5/7         : no
 A5/1         : yes
 Channels     : SDCCH + TCH/F + TCH/H
 Full-Rate V1 : yes
 Full-Rate V2 : yes
 Full-Rate V3 : no
 Half-Rate V1 : yes
 Half-Rate V3 : no
 Min RXLEV    : -106

OsmocomBB# call 1 0987785050
OsmocomBB#
% (MS 1)
% Call has been rejected

OsmocomBB# sms 1 0987785050 testSMS
OsmocomBB#
% (MS 1)
% SMS to 0987785050 failed: (MO) SMS rejected

OsmocomBB# net
OsmocomBB# network sho
OsmocomBB# network show 1

OsmocomBB#
% (MS 1)
% Trying to registering with network...

% (MS 1)
% Trying to registering with network...

% (MS 1)
% Trying to registering with network...

% (MS 1)
% Searching network...


% (MS 1)
% Trying to registering with network...

% (MS 1)
% Trying to registering with network...

% (MS 1)
% Searching network...

OsmocomBB# sms 1 0987785050 testSMS

% (MS 1)
% Trying to registering with network...
call 1 0987785050      
OsmocomBB#
% (MS 1)
% Call has been rejected

OsmocomBB# sms 1 0987785050 testSMS
OsmocomBB#
% (MS 1)
% SMS to 0987785050 failed: (MO) SMS rejected


% (MS 1)
% Trying to registering with network...



2013/4/15 Pavel Baturko <[hidden email]>
Hi,

Could you please provide mobile.log and log from VTY in case of automatic network selection "network-selection-mode auto" ans "no stick" option?

Thanks,
Pavel


On Mon, Apr 15, 2013 at 10:46 AM, hungbangchu <[hidden email]> wrote:
Hi,

My attachment is file mobile.log.

Any one can mobile.log
<http://baseband-devel.722152.n3.nabble.com/file/n4025987/mobile.log>   help

me?



pab wrote
> Hi,
>
>> There is no such command.
>> Error occurred during reading below line:
>>  stick on
> 'stick' option should be used as 'stick ARFCN'. with this option your MS
> will be forced to use specific ARFCN. Be sure that this ARFCN is visible
> by
> your MS and owned by your SIM's service provider.
>
> Also I think it's difficult for people in this list to help you without
> logs, at least attached mobile app log could help.
>
> Thanks,
> Pavel





--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025987.html

Sent from the baseband-devel mailing list archive at Nabble.com.





--
Thanks and Best Regards
--
From: Hoàng Mạnh Hùng

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

hungbangchu
Thanks for your support.

I only enabled TX --> still failed

But then, I update libosmocombb, and enable TX --> connect network successful

Your support is very helpful.


2013/4/15 Pavel Baturko <[hidden email]>
As I see your Channel Requests remain unanswered from the network. Are you sure that you are using firmware compiled with enabled TX (I do not remember if it could be observed from layer1.log)?
If yes, you can try not to use the ARFCN that is selected by MS automatically (in your log - 748DCS) by signal level, but try to stick on another ARFCN: e.g. 746DCS - second candidate by rxlev - or other. for this case use "stick 746" option and check for network's answers (ImmAss or ImmAssReject).
You can also try to use other SIMs.

Thanks,
Pavel


On Mon, Apr 15, 2013 at 1:11 PM, Hoàng Mạnh Hùng <[hidden email]> wrote:
Hi Pavel Baturko,


mobile.cfg, mobile.log, layer1.log and other logs in case of automatic network selection "network-selection-mode auto" ans "no stick" option:

root@UR:/tmp# telnet 127.0.0.1 4247
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Welcome to the OsmocomBB control interface

OsmocomBB> en
OsmocomBB# sho

OsmocomBB# show ms
MS '1' is up, service is limited
  IMEI: 357337016773249
     IMEISV: 3573370167732490
     IMEI generation: fixed
  automatic network selection state: A0 null
  cell selection state: PLMN search
  radio ressource layer state: idle
  mobility management layer state: MM idle, PLMN search

OsmocomBB# show
OsmocomBB# show sub
OsmocomBB# show subscriber
Mobile Subscriber of MS '1':
 IMSI: 452040399998391
 ICCID: 89840403940099983911
 Service Provider Name: VIETTEL
 SMS Service Center Address: <a href="tel:%2B84980200030" value="+84980200030" target="_blank">+84980200030
 Status: U2_NOT_UPDATED  IMSI detached  LAI: invalid
 Key: sequence 1  74 5d 70 bb 32 6a a0 00
 Access barred cells: no
 Access classes: C4
 List of preferred PLMNs:
        MCC    |MNC
        -------+-------
        452    |04        (Vietnam, Viettel Mobile)
        456    |08        (Cambodia, Viettel)
        457    |03        (Laos, Unitel)
        372    |03        (Haiti, 03)

OsmocomBB# show
OsmocomBB# show sup
OsmocomBB# show support
Supported features of MS '1':
 Phase 2 mobile station
 R-GSM        : yes
 E-GSM        : yes
 P-GSM        : yes
 GSM900 Class : 4
 DCS 1800     : yes
 DCS Class    : 1
 GSM 850      : yes
 GSM 850 Class: 4
 PCS 1900     : yes
 PCS Class    : 1
 GSM 480      : no
 GSM 450      : no
 CECS         : no
 VGCS         : no
 VBS          : no
 SMS          : yes
 SS_IND       : yes
 PS_CAP       : no
 CMSP         : no
 SoLSA        : no
 LCSVA        : no
 LOC_SERV     : no
 A5/1         : yes
 A5/2         : yes
 A5/3         : no
 A5/4         : no
 A5/5         : no
 A5/6         : no
 A5/7         : no
 A5/1         : yes
 Channels     : SDCCH + TCH/F + TCH/H
 Full-Rate V1 : yes
 Full-Rate V2 : yes
 Full-Rate V3 : no
 Half-Rate V1 : yes
 Half-Rate V3 : no
 Min RXLEV    : -106

OsmocomBB# call 1 0987785050
OsmocomBB#
% (MS 1)
% Call has been rejected

OsmocomBB# sms 1 0987785050 testSMS
OsmocomBB#
% (MS 1)
% SMS to 0987785050 failed: (MO) SMS rejected

OsmocomBB# net
OsmocomBB# network sho
OsmocomBB# network show 1

OsmocomBB#
% (MS 1)
% Trying to registering with network...

% (MS 1)
% Trying to registering with network...

% (MS 1)
% Trying to registering with network...

% (MS 1)
% Searching network...


% (MS 1)
% Trying to registering with network...

% (MS 1)
% Trying to registering with network...

% (MS 1)
% Searching network...

OsmocomBB# sms 1 0987785050 testSMS

% (MS 1)
% Trying to registering with network...
call 1 0987785050      
OsmocomBB#
% (MS 1)
% Call has been rejected

OsmocomBB# sms 1 0987785050 testSMS
OsmocomBB#
% (MS 1)
% SMS to 0987785050 failed: (MO) SMS rejected


% (MS 1)
% Trying to registering with network...



2013/4/15 Pavel Baturko <[hidden email]>
Hi,

Could you please provide mobile.log and log from VTY in case of automatic network selection "network-selection-mode auto" ans "no stick" option?

Thanks,
Pavel


On Mon, Apr 15, 2013 at 10:46 AM, hungbangchu <[hidden email]> wrote:
Hi,

My attachment is file mobile.log.

Any one can mobile.log
<http://baseband-devel.722152.n3.nabble.com/file/n4025987/mobile.log>   help

me?



pab wrote
> Hi,
>
>> There is no such command.
>> Error occurred during reading below line:
>>  stick on
> 'stick' option should be used as 'stick ARFCN'. with this option your MS
> will be forced to use specific ARFCN. Be sure that this ARFCN is visible
> by
> your MS and owned by your SIM's service provider.
>
> Also I think it's difficult for people in this list to help you without
> logs, at least attached mobile app log could help.
>
> Thanks,
> Pavel





--
View this message in context: http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025987.html

Sent from the baseband-devel mailing list archive at Nabble.com.





--
Thanks and Best Regards
--
From: Hoàng Mạnh Hùng




--
Thanks and Best Regards
--
From: Hoàng Mạnh Hùng
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Baseband: MS '1' is up, service is limited

mrdesc
This post has NOT been accepted by the mailing list yet.
In reply to this post by hungbangchu
Hi i find that the problem is the version the mobile and the image .bin that you load in  mobile, that is to say:
for MotorolaC115/C117  you need the binary into: (compal_E87) (layer1.compalram.bin)

MotorolaC123/C121/C118  you need the binary into: (compalE88)

MotorolaC140/C139 you need the binary into: (compalE86)

MotorolaC155 you need the binary into: (compalE99) — our secondary target

MotorolaV171 you need the binary into: (compalE68/E69)


i hope that this can help you.

I recommend you read: https://sdrlatino.wordpress.com/2015/05/21/mi-segunda-hora-con-osmoconbb-configuracion-correcta/


Regards @mrdesc from colombia.

Cordialmente:


Daniel Jose Escobar A.
Ing. of Telecomunications

Loading...